FM-12: 鋸片BOLT或主軸鎖無法操作

FM-12 鋸片BOLT或主軸鎖無法操作

• Lock is not aligned with the spindle position
• Left-hand bolt is being turned the wrong direction
• Hex recess or wrench is rounded
• Bolt, washer, or spindle threads are dirty or damaged
• Spindle lock mechanism is broken

1. The spindle lock engages only while stopped, the bolt turns in the correct direction, and the blade clamps securely.

1. Clean the bolt, washer, and accessible spindle seating dry and inspect for cross-threading, cracks, burrs, or incorrect hardware.
2. If the lock will not engage or the bolt is seized, stripped, or damaged, do not improvise leverage; have the spindle and hardware serviced.
3. Remove the battery, use the supplied hex wrench, and press the spindle lock while rotating the blade by hand until the lock fully engages.
4. Remember the left-hand thread: turn the blade bolt clockwise to loosen and counterclockwise to tighten; stop if the wrench or recess begins to round.

这是完整维修手册中所含故障排除指南的预览。

• 主軸鎖無法啟動，附送扳手無法轉動bolt，或鋸片bolt卡死、滑牙或交叉螺紋。

  主軸鎖無法啟動，附帶扳手無法 1. 拆除 battery，使用附帶六角扳手，按壓主軸鎖，同時手動旋轉鋸片直到鎖完全啟動。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。