FM-11: 深度或斜切調校無法移動或固定

深度或斜切調校機構無法移動、鎖定或保持設定，導致切割不準確同操作不安全。

• Sawdust or resin is packed in a pivot or scale
• Lever or knob is not fully released or tightened
• Threads, cam, pivot, or scale are worn
• Shoe or linkage is bent from impact
• External adjustment hardware is cracked or missing

1. The shoe moves smoothly when released, locks without slip, and preserves the selected depth and angle.

1. Clean accessible sawdust and resin from the pivot, scale, and external threads with a dry brush and cloth; do not force the mechanism.
2. Set the depth or angle, lock it firmly, and push on the shoe by hand to verify it cannot shift; reject any cracked lever, knob, or bent linkage.
3. If the adjustment remains jammed, stripped, or unable to hold, replace only approved owner-accessible hardware or route the saw to service before cutting.
4. Remove the battery and support the shoe, then release only the depth lever or bevel knob for the adjustment being checked.

这是完整维修手册中所含故障排除指南的预览。

• 外部調校硬件

• 鋸鞋無法擺動或滑動，深度桿或斜切旋鈕無法鎖定，或操作或切割時設定會移位。

  鞋子無法旋轉或滑動，深度桿或斜角旋鈕 1. 拆除 battery 並支撐鞋子，然後僅鬆開正在檢查的深度桿或斜角旋鈕。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。