FM-07: 鋸片搖晃、摩擦、震動或磨損

FM-07 鋸片震動、摩擦、震盪或磨損

• Blade is bent, cracked, chipped, or wrong bore
• Blade, washer, or bolt is dirty or misassembled
• Blade bolt is loose
• Shoe or guard is bent into the blade path
• Spindle or bearing has side play or damage

1. A correct blade runs true, clears the guard and shoe, and produces no abnormal vibration or grinding.

1. Remove and reinstall the blade in the correct direction with clean mating surfaces, the correct outer washer, and the blade bolt securely tightened.
2. Rotate the blade by hand with the battery out and check for side rub, guard contact, a bent shoe, or spindle side play through a full revolution.
3. Perform a brief clear no-load test only if the hand check is normal; persistent wobble, grinding, or side play requires authorized spindle or bearing service.
4. Remove the battery, place the saw on a stable surface, and inspect the blade for bending, cracks, missing tips, wrong bore, or other damage; replace any suspect blade.

这是完整维修手册中所含故障排除指南的预览。

• 木工圓鋸片

• The blade runs off-center, touches the guard or shoe, produces unusual vibration, or makes a grinding sound.

  The blade runs off-center, touches the guard or shoe, produces 1. Remove the battery, place the saw on a stable surface, and inspect the blade for

• Blade wobbles or grinds

  Blade wobbles or grinds Blade setup, damage, shoe or guard contact, spindle, or bearing fault; use FM-07.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。