Sök reparationsguider
Hitta reparationsguider, manualer, symtom och felkoder i kunskapsbasen.
Enheten stängs av abrupt
Borren stannar, kärvar, stängs av eller har låg effekt
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
With a charged pack installed and direction selected, the trigger produces no light, sound, or anvil movement.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.
FM-04: FM-04 KÖRTIDEN ÄR MYCKET KORT ELLER VERKTYGET STÄNGS AV PLÖTSLIGT
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-11: FM-11 HASTIGHET ELLER MOMENT ÄR LÅGT MED KORREKT INSTÄLLNING
FM-12: FM-12 BIT SITTER FAST, STALLAR ELLER VRIDER BORREN
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD