Поиск руководств по ремонту

Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.

Руководства

Симптомы

WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
BATTERY SEATS BUT WILL NOT STAY LATCHED
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
O battery para antes da posição totalmente encaixada e o carregador não pode iniciar uma carga normal. Nenhuma rachadura visível no carregador, detritos condutivos ou pacote inchado foi confirmado até o momento.
Pemicu menyalakan area kerja, tetapi motor tetap diam dan landasan tidak bergerak.
battery går inte att sätta i helt, klicka på plats, hålls kvar eller släpps normalt.
The battery reaches the normal seated position, but the release latch does not retain it and the pack can slide away without pressing the release button.
插入充电器时断路器或 GFCI 跳闸
Bladet håller inte fastspänt
Med klämspaken fungerande går ett korrekt blad inte i helt eller klarar handdragstest.
Tombol maju/mundur tidak masuk, kunci tengah gagal, atau alat berjalan ke arah yang salah.
Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
Rotation and impact pulses are steady, but a normal fastener advances much more slowly than expected.
The accessory slips from the fastener, damages it, breaks it, or drives it beyond the intended seat.

Режимы неисправностей

part