FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK

The accessory bit binds, causing the tool to stall, twist sharply, or stop unexpectedly in the work.

• Bit or fastener is damaged, dull, or wrong for the task
• Tool is off-axis or the work is not secured
• Pilot hole or clearance is inadequate
• Load exceeds the tool, battery, or accessory capability

1. The correct accessory drives straight without binding, stalling, or uncontrolled reaction.

1.

Это предпросмотр руководства по устранению неисправностей из полного руководства по ремонту.

• The accessory catches or stops in the material and the tool reacts sharply in the hand.

  The accessory catches or stops in the material and the 1. Release the trigger and control the tool until all motion stops.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

На публичных страницах показан только предпросмотр. Купите полное руководство, чтобы скачать все шаги, схемы и процедуры проверки.