Поиск руководств по ремонту
Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.
BATTERY WILL NOT SEAT, LATCH, OR RELEASE
Заряженный, защелкнутый battery и нормальная команда триггера не вызывают вращения патрона.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
Bit jams or drill stalls
Unit shuts off abruptly
The bit jams, the motor stalls, or the drill twists sharply in the hands during work.
Bladet lämnar linjen, böjs överdrivet, böjs eller går av under en annars kontrollerad skärning.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-08: FM-08 Патрон не открывается, не закрывается или не принимает биту
FM-13: Fm-13 Le frein électrique ne stoppe pas la lame rapidement
FM-08: FM-08 LA LAME INSTALLÉE NE SE LIBÈRE PAS
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-08: FM-08 ЗАЖИМНЫЕ КУЛАКИ БЕЗКЛЮЧЕВОГО ПАТРОНА НЕ ОТКРЫВАЮТСЯ, НЕ ЗАКРЫВАЮТСЯ, НЕ ОСВОБОЖДАЮТСЯ ИЛИ НЕ ЗАХВАТЫВАЮТ
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
Съёмный 20V МАКС* battery
Холодный заряженный исправный battery
Eye protection
Charged pack
Known-good charged compatible pack
Сухой brush
Бита для отвертки или держатель бит
Воротник режима или крутящего момента
Совместимый battery
Встроенный держатель бит
Зарядное устройство и индикатор
Курок с переменной скоростью
Одобренное зарядное устройство для battery
Совместимый 12V MAX* аккумуляторный блок battery
заготовка
Прямая сверло с круглым хвостовиком
таймер
Это руководство