Поиск руководств по ремонту

Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.

Модели

Руководства

Симптомы

A correct-looking bit will not enter fully or can be pulled out after the collar is released.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
battery nie wsuwa się całkowicie do uchwytu, nie pozostaje zatrzymany lub nie zwalnia normalnie.
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
The charger green LED does not flash, never becomes steady, or the battery remains discharged.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
Bladet lämnar linjen, böjs överdrivet, böjs eller går av under en annars kontrollerad skärning.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
BATTERY WILL NOT SEAT, LATCH, OR RELEASE

Режимы неисправностей

part