model
DCB115
DeWalt DCB115 — однопортовое литий-ионное зарядное устройство battery, предназначенное для аккумуляторов 12V MAX, 20V MAX и FLEXVOLT battery. Оснащено входом переменного тока 120 V для североамериканского рынка и одноступенчатым выходом зарядки 4 A.
0% успешных ремонтов по отзывам
Сведения о модели
Номер модели: DCB115
Также известна как: DeWalt, DeWalt Tools, DeWalt Power Tools, DCB115
Руководства по ремонту
Симптомы
- The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
yet been confirmed. and the charger for cracked rails; use FM-17 or FM-18 if found.
- POWER CORD OR PLUG IS DAMAGED, LOOSE, SCORCHED, OR HOT
Stop using it and unplug by the plug only if the connection is safe to POWER CORD OR PLUG IS DAMAGED, LOOSE, Remove the battery, unplug the charger, and take it off the wall before correcting the mount.
- ЗАРЯДНОЕ УСТРОЙСТВО СТАНОВИТСЯ НЕОБЫЧНО ГОРЯЧИМ ИЛИ МОКРЫМ, ИЛИ ИМЕЕТ ОБГОРЕВШИЕ КОНТАКТЫ
Отключите питание и дайте зарядному устройству и аккумулятору остыть естественным образом на ЗАРЯДНОЕ УСТРОЙСТВО СТАНОВИТСЯ НЕОБЫЧНО ГОРЯЧИМ ИЛИ ВЛАЖНЫМ, ИЛИ ИМЕЕТ ОБГОРЕВШИЕ КОНТАКТЫ Не вставляйте и не заряжайте поврежденный аккумулятор; снимайте его только если это безопасно.
- The red light keeps blinking while the yellow indicator stays on even after the battery and charger have naturally reached an allowed room-temperature environment.
The red light keeps blinking while the yellow indicator Remove the battery and let it reach normal room temperature naturally;
- Metal chips, grinding dust, steel wool, foil, or another dry conductive buildup is visible in the battery cavity, around contacts, or at ventilation slots. No liquid or active smoke, spark, burning, or melting is present.
Metal chips, grinding dust, steel wool, foil, or another dry 1. Unplug the charger and remove the battery before a conductive particle
- Liquid has entered the charger or battery interface, or the charger shows smoke, sparks, burning odor, charring, melting, or active electrical arcing.
Liquid has entered the charger or battery interface, or Warn other people away and disconnect power only from a safe
- Один полностью установленный, физически исправный совместимый battery не показывает красный или желтый свет, в то время как тот же DCB115 начинает заряжать другие исправные совместимые аккумуляторы с той же проверенной розетки.
Один полностью установленный, физически исправный совместимый battery не дает красного или желтого света, в то время как тот же DCB115
- The attached cord or plug is cut, frayed, crushed, loose, discolored, scorched, or abnormally hot. There is no current smoke, spark, flame, melting charger housing, or liquid ingress.
The attached cord or plug is cut, frayed, crushed, loose, 1. Stop using the charger and unplug it by the plug only if the connection is
- A battery intended for the charger has physical damage, swelling, leakage, wetness, burned or melted terminals, or a deformed case. It may or may not still fit the charger.
A battery intended for the charger has physical damage, 1. Do not insert or recharge the damaged pack; if it is already in the
- The charger has dry visible structural damage to its upper or lower housing, tabletop feet, battery rails, retention area, contact support, or rear wall-mount slots. No liquid, smoke, spark, burning, or melting is active.
The charger has dry visible structural damage to its Unplug the charger and remove the battery before handling or flexing
- Independent checks show the battery charges and powers a tool normally, but the red or yellow indicator is too dim to read, remains stuck, stays on after pack removal, or does not match the label pattern.
Independent checks show the battery charges and Unplug the charger, remove the pack, and clean only the outside of the
- The charger housing becomes much hotter than normal charging warmth or operation repeatedly pauses as the charger heats, but there is no smoke, spark, burning odor, liquid, melting, swollen pack, or visible structural damage.
The charger housing becomes much hotter than normal Disconnect power, remove the battery, and let both complete items cool
Режимы неисправностей
- FM-17: BATTERY ТРЕСНУЛ, РАЗДУЛСЯ, ПРОТЕКАЕТ, МОКРЫЙ ИЛИ ИМЕЕТ ОБГОРЕЛЫЕ КОНТАКТЫ
FM-17 BATTERY ТРЕСНУЛ, РАЗДУЛСЯ, ПРОТЕКАЕТ, МОКРЫЙ ИЛИ ИМЕЕТ ОБГОРЕЛЫЕ КОНТАКТЫ
- FM-03: BATTERY ЗАСТРЯЛ В ЗАРЯДНОМ УСТРОЙСТВЕ ИЛИ НЕ ВЫПУСКАЕТСЯ
FM-03 BATTERY ЗАСТРЯЛ В ЗАРЯДНОМ УСТРОЙСТВЕ ИЛИ НЕ ВЫПУСКАЕТСЯ
- FM-05: ОДИН СОВМЕСТИМЫЙ АККУМУЛЯТОР НЕ ДАЕТ СВЕТА, В ТО ВРЕМЯ КАК ДРУГИЕ ЗАРЯЖАЮТСЯ
FM-05 ОДИН СОВМЕСТИМЫЙ АККУМУЛЯТОР НЕ ДАЕТ СВЕТА, В ТО ВРЕМЯ КАК ДРУГИЕ ЗАРЯЖАЮТСЯ
- FM-15: ПРОВОДЯЩИЕ ЗАГРЯЗНЕНИЯ В ОТСЕКЕ ИЛИ ВЕНТИЛЯЦИОННЫХ ОТВЕРСТИЯХ BATTERY
FM-15 ПРОВОДЯЩИЙ МУСОР В ПОРОЖДЕНИИ ИЛИ ВЕНТИЛЯЦИОННЫХ ОТВЕРСТИЯХ BATTERY
- FM-19: НАСТЕННОЕ ЗАРЯДНОЕ УСТРОЙСТВО СДВИГАЕТСЯ ИЛИ ОТКРЕПЛЯЕТСЯ ПРИ ЦЕЛЫХ ПАЗАХ
FM-19 НАСТЕННОЕ ЗАРЯДНОЕ УСТРОЙСТВО СДВИГАЕТСЯ ИЛИ ОТКРЕПЛЯЕТСЯ ПРИ ЦЕЛЫХ ПАЗАХ
- FM-06: ЗАДЕРЖКА НАГРЕВА/ОХЛАЖДЕНИЯ ОСТАЁТСЯ ПОСЛЕ ВОЗВРАЩЕНИЯ АККУМУЛЯТОРА К КОМНАТНОЙ ТЕМПЕРАТУРЕ
FM-06 ЗАДЕРЖКА НАГРЕВА/ОХЛАЖДЕНИЯ ОСТАЁТСЯ ПОСЛЕ ВОЗВРАЩЕНИЯ АККУМУЛЯТОРА К КОМНАТНОЙ ТЕМПЕРАТУРЕ
- FM-01: НЕТ ИНДИКАТОРА ИЛИ РЕАКЦИИ ЗАРЯДКИ ПРИ УСТАНОВЛЕННОМ АККУМУЛЯТОРЕ
FM-01 НЕТ ИНДИКАТОРА ИЛИ ОТВЕТА НА ЗАРЯДКУ С УСТАНОВЛЕННЫМ АККУМУЛЯТОРОМ
- FM-02: BATTERY НЕ ВХОДИТ ПОЛНОСТЬЮ ИЛИ НЕ УСТАНАВЛИВАЕТСЯ В ЗАРЯДНОЕ УСТРОЙСТВО
FM-02 BATTERY НЕ СКОЛЬЗИТ ПОЛНОСТЬЮ В ЗАРЯДНОЕ УСТРОЙСТВО ИЛИ НЕ УСТАНАВЛИВАЕТСЯ
- FM-16: ПОПАДАНИЕ ЖИДКОСТИ ИЛИ ЗАРЯДНОЕ УСТРОЙСТВО ДЫМИТ, ИСКРИТ, ГОРИТ ИЛИ ПЛАВИТСЯ
FM-16 ПОПАДАНИЕ ЖИДКОСТИ ИЛИ ЗАРЯДНОЕ УСТРОЙСТВО ДЫМИТ, ИСКРИТ, ГОРИТ ИЛИ ПЛАВИТСЯ
- FM-13: ПОДКЛЮЧЕНИЕ ЗАРЯДНОГО УСТРОЙСТВА ВЫЗЫВАЕТ СРАБАТЫВАНИЕ ВЫКЛЮЧАТЕЛЯ ИЛИ УЗО
FM-13 ПОДКЛЮЧЕНИЕ ЗАРЯДНОГО УСТРОЙСТВА ВЫЗЫВАЕТ СРАБАТЫВАНИЕ АВТОМАТА ИЛИ УЗО
- FM-11: ИНДИКАТОР ТЕМНЫЙ, ЗАСТРЯЛ ИЛИ НЕПРАВИЛЬНЫЙ ПРИ НОРМАЛЬНОЙ ЗАРЯДКЕ
FM-11 ИНДИКАТОР ТЕМНЫЙ, ЗАСТРЯЛ ИЛИ НЕПРАВИЛЬНЫЙ ПРИ НОРМАЛЬНОЙ ЗАРЯДКЕ
- FM-04: BATTERY УСТАНАВЛИВАЕТСЯ, НО НЕ ОСТАЕТСЯ НАДЕЖНО ЗАКРЕПЛЕННЫМ В ЗАРЯДНОМ УСТРОЙСТВЕ
FM-04 BATTERY УСТАНАВЛИВАЕТСЯ, НО НЕ ОСТАЕТСЯ НАДЕЖНО ЗАКРЕПЛЕННЫМ В ЗАРЯДНОМ УСТРОЙСТВЕ
Связанная диагностика
Common symptoms
- The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
- POWER CORD OR PLUG IS DAMAGED, LOOSE, SCORCHED, OR HOT
- ЗАРЯДНОЕ УСТРОЙСТВО СТАНОВИТСЯ НЕОБЫЧНО ГОРЯЧИМ ИЛИ МОКРЫМ, ИЛИ ИМЕЕТ ОБГОРЕВШИЕ КОНТАКТЫ
- The red light keeps blinking while the yellow indicator stays on even after the battery and charger have naturally reached an allowed room-temperature environment.
- Metal chips, grinding dust, steel wool, foil, or another dry conductive buildup is visible in the battery cavity, around contacts, or at ventilation slots. No liquid or active smoke, spark, burning, or melting is present.
- Liquid has entered the charger or battery interface, or the charger shows smoke, sparks, burning odor, charring, melting, or active electrical arcing.
- Один полностью установленный, физически исправный совместимый battery не показывает красный или желтый свет, в то время как тот же DCB115 начинает заряжать другие исправные совместимые аккумуляторы с той же проверенной розетки.
- The attached cord or plug is cut, frayed, crushed, loose, discolored, scorched, or abnormally hot. There is no current smoke, spark, flame, melting charger housing, or liquid ingress.
- A battery intended for the charger has physical damage, swelling, leakage, wetness, burned or melted terminals, or a deformed case. It may or may not still fit the charger.
- The charger has dry visible structural damage to its upper or lower housing, tabletop feet, battery rails, retention area, contact support, or rear wall-mount slots. No liquid, smoke, spark, burning, or melting is active.