symptom
The blade leaves the line, flexes excessively, bends, or breaks during an otherwise controlled cut.
Связанные режимы неисправностей
Включено в полное руководство
- Анализ первопричины
- Необходимые инструменты
- Пошаговая процедура ремонта
- Схемы
- Разнесённые виды
- Проверки после ремонта
На публичных страницах показан только предпросмотр. Купите полное руководство, чтобы скачать все шаги, схемы и процедуры проверки.
Связанные симптомы и коды ошибок
Related models
Common symptoms
- A charged, latched battery and normal lock-off and trigger command produce no blade stroke.
- The battery will not insert fully, click into place, remain retained, or release normally.
- The charger will not begin or complete charging, or its green light does not behave normally.
- The cool saw starts, then stops during a brief no-load test or light cut before heat builds.
- The lock-off or trigger sticks, will not move fully, starts unpredictably, or will not stop reliably.
- The tool-free blade-clamp release lever will not reach full open or close securely.
- With the clamp lever working, a correct blade will not enter fully or fails the hand tug-check.
- The clamp lever opens normally, but the installed blade remains trapped in the front clamp.
- The shoe will not pivot freely, is bent or loose, or will not sit firmly against the work.