BOSCH GSR12V-140FCB22 KIT BATTERY (BAT414) - MANUAL DE REPARAȚII ȘI ÎNTREȚINERE Manual de reparații
Instrucțiuni cuprinzătoare de reparații și întreținere pentru pachetul Bosch BAT414 12V Max litiu-ion battery, inclusiv depanare, siguranță și ghid pentru înlocuire.
$39.99
Ultima actualizare Aug 7, 2026, 6:10 AM
Manual information
Despre acest manual
Instrucțiuni cuprinzătoare de reparații și întreținere pentru pachetul Bosch BAT414 12V Max litiu-ion battery, inclusiv depanare, siguranță și ghid pentru înlocuire.
0% reparații reușite raportate
$39.99
Manualul complet include
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Previzualizare cuprins
- Bosch Gsr12v-140fcb22 Kit Battery (bat414) - Manual de Reparare și Întreținere
- Cele șase lucruri care contează cel mai mult
- Ce are de fapt acest model
- Harta indicatorilor și semnalelor
- Avertisment revizie model
- Traseul de Încărcare și Putere
- Secvența de utilizare normală
- Comportament normal care poate părea o defecțiune
- Ce NU are acest model
- FM-10 CARCASA, TIJA, CLEMA DE ELIBERARE, TERMINALUL, BARRIERA SAU CORPUL PACHETULUI ESTE
- Sarcină obișnuită
- FM-11 BATTERY A FOST UMED, SUBMERGAT SAU EXPUS LA LICHID CONDUCTOR SAU
- Mișcări
- FM-08 BATTERY DEVINE FOARTE FIERBINTE FĂRĂ FUM, SCÂNTEI,
- FM-15
This preview shows only a portion of the complete repair manual. Purchase to access the full repair documentation, downloadable PDF and detailed repair procedures.
Cauze probabile
- The pack is discharged, too hot or cold, or in a protection state
- Terminal faces are dirty, wet, damaged, or not aligned
- The insertion stem stops before the electrical seat even though the pack looks inserted
- The sealed cell, conductor, terminal, or protection path has failed
- The comparison tool, rather than the battery, has failed
- The application is binding, stalled, overloaded, or using a damaged bit or attachment
- The pack is near empty, overheated, overcooled, or in protection
- Dirty or resistive contacts heat or interrupt current
- The sealed cell, conductor, temperature, or protection path is weak
- The tool has abnormal drag or its own electronic fault
- The battery is not fully charged or is at an extreme temperature
- Contact resistance from dirt, wear, or damage limits current
- The bit, attachment, fastener, or work interface is binding, dull, damaged, or overloaded
- The sealed cells or internal links have lost power capability
- The tool motor or controller is weak
- The pack has aged or lost usable cell capacity
- The full indication came from a charger or contact problem
- Cold, heat, a heavy drill/driver task, or tool drag raised energy demand
- Dirty contacts created loss and heat
- The comparison task or tool condition was not equivalent
- The sealed cells have high self-discharge or an internal leakage path
- The pack was not actually full before storage
- Storage was hot, wet, conductive, or near metal
- The battery was left in a tool that drew standby current
- The comparison interval or starting state was not controlled
- The insertion stem, guide surfaces, or seating stops are worn, dirty, or distorted
- Battery contacts are recessed, contaminated, loose, or damaged
- The charger contact carrier or slot is damaged
- The release tabs or seating geometry do not hold the electrical interface
- An internal battery terminal link is movement-sensitive
- The tool or work is stalled, overloaded, or binding
- Charging or use occurred in a hot environment with poor ventilation
- Dirty or resistive contacts are generating heat
- The pack has an internal cell, conductor, or protection defect
- The charger or tool is driving an abnormal condition
- Internal cell short, thermal runaway, or conductor failure
- Severe impact, puncture, crushing, fire, or excessive heat exposure
- Liquid or conductive contamination caused a short
- Improper charger, adapter, direct terminal connection, or modification
- A damaged pack was charged or used
- Drop, impact, crushing, puncture, or tool/charger ejection
- Heat, age, internal gas generation, or cell swelling
- Forced insertion, prying, adapters, or release-tab abuse
- Conductive/corrosive contamination damaged contacts or barriers
- A prior repair or modification compromised the sealed housing
- Rain, hose, puddle, submersion, or wet storage
- Salt, pool, bleach, cleaner, or chemical exposure
- Liquid entered through the terminal area or housing seam
- The pack was placed in a wet charger or tool
- A user attempted washing or liquid cleaning
- One or both release tabs or a mating catch are jammed, broken, or loaded sideways
- Debris, swelling, distortion, heat damage, or corrosion binds the insertion stem
- The pack was forced, twisted, or inserted with an adapter
- The tool or charger housing is damaged
- The interface is still energized or the tool is under mechanical load
- Battery contacts are worn, recessed, contaminated, loose, or damaged
- The insertion stem or release tabs permit electrical movement even though retention feels secure
- The internal terminal link is movement-sensitive
- The tool contact carrier or wiring is damaged
- Hand pressure is masking an unsafe interface fault
- The outlet or charger has no power or is faulty
- The pack is outside the allowed charging temperature range
- Contacts or guides are dirty, wet, damaged, or not fully seated
- The charger is not designated for the battery platform
- The sealed cell, temperature, conductor, terminal, or protection path has failed
- Wrong battery platform, identity mismatch, or an adapter is being attempted
- Debris obstructs the insertion stem, guide surfaces, tool cavity, or charger socket
- The stem, guide rib, seating stop, housing, or mating cavity is distorted
- Contacts or insulating barriers are bent or displaced
- The tool or charger interface, rather than the battery, is damaged
- A side release tab is dirty, cracked, worn, broken, or not returning
- The mating catch in the tool is worn or damaged
- The insertion stem or guide geometry misaligns the retaining tabs
- The housing is distorted even though insertion is possible
- The pack was not pushed fully to the normal seated stop
Model suportat
Modele asociate
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Bosch
Vezi detalii
Simptome comune
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Moduri de defecțiune
Rezumat
Un pachet BAT414 battery complet inserat și aparent intact nu produce ieșire utilizabilă într-o unealtă Bosch 12V Max compatibilă.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
battery pierde rapid încărcarea în timpul depozitării și deconectării, devenind inutilizabil după o scurtă perioadă de depozitare uscată și răcoroasă.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
Încărcarea pornește sau se oprește intermitent când battery este mișcat sau ținut în anumite poziții din cauza contactului instabil sau a arcului electric.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
battery se încălzește anormal de rapid în timpul încărcării, depozitării sau utilizării uneltei fără fum, scântei, scurgeri sau umflare.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
Pericol activ battery cu fum, șuierat, evacuare, scântei, flacără, topire sau scurgeri indicând o reacție termică scăpată de sub control sau daune severe.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
battery a fost expus la apă sau lichide conductoare/corozive, cauzând daune sau condiții nesigure.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
battery este complet sau parțial angajat, dar nu poate fi scos prin operarea eliberării normale și tragere dreaptă.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
Unealta pornește, dar ieșirea battery se întrerupe brusc sub sarcină obișnuită, cauzând pierdere bruscă de putere.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Rezumat
battery se inserează complet, dar una sau ambele cleme laterale de eliberare nu îl rețin, sau battery poate fi scos fără a apăsa ambele cleme.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Manuale asociate
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii
Vezi detalii