FM-06: A ENERGIA CORTA QUANDO A FERRAMENTA OU BATTERY É MOVIDA

corte de energia dependente do movimento.

• Dry contamination, wear, or damage at the battery contacts
• Battery shell or latches allow electrical movement despite physical retention
• Tool contact block or internal wiring is loose
• Trigger, direction switch, brush, or motor connection is intermittent

1. Ordinary handling no longer interrupts power, or the internal intermittent path is conclusively routed to service.

1. Repeat with a known-good compatible battery to separate a pack-side intermittent condition from the tool-side path.
2. With the chuck empty, make one brief no-load test while changing only normal hand orientation; do not flex, strike, shim, or hold the pack in place.
3. If a proven battery still causes cutout with ordinary movement, remove it and route the contact block, wiring, switch, brush, or motor path to service.
4. Release the trigger and remove the battery before inspecting the contacts, latches, stem, and tool rail path for heat, burning, looseness, or impact damage.
5. Dry-clean the accessible contacts and latch surfaces, then install the original pack until the release latch pass an unpowered pull test.

Esta é uma prévia da orientação de solução de problemas incluída no manual de reparo completo.

• O battery permanece fisicamente travado, mas o motor, LED ou ambos desligam e voltam quando a ferramenta ou battery é movida pela orientação normal de trabalho.

  O battery permanece fisicamente travado, mas o motor, LED, ou 1. Solte o gatilho e remova o battery antes de inspecionar os contatos,

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

As páginas públicas mostram apenas uma prévia. Compre o manual completo para baixar as etapas de reparo, diagramas e procedimentos de verificação completos.