Reparatiegidsen zoeken
Vind reparatiegidsen, handleidingen, symptomen en foutcodes in de kennisbank.
Rook, vloeistof, kabel- of accuschade
Rook, vlam, vonken, vloeistof, beschadigde kabel, battery-schade of blootliggende structuur is aanwezig.
Rook, vloeistof, zwelling of grote schade
Rook, vonken, vloeistof, zwelling, lekkage, brandlucht, blootgestelde onderdelen of gebarsten structuur aanwezig
HET GEREEDSCHAP OF BATTERY GEEFT ROOK, VLOEISTOF, ZWELLING OF BRANDGEUR AF
Blad blijft niet geklemd
De lopende zaag springt, trilt tegen het werk, hapt of schopt achteruit of opzij.
Klemhendel beweegt niet
Met de klemhendel werkend, schuift een correct blad niet volledig in of faalt de handtrekcontrole.
Na het loslaten van de trekker blijft het blad merkbaar langer bewegen dan normaal.
De koele zaag start, stopt dan tijdens een korte vrijlooptest of lichte zaagsnede voordat warmte zich opbouwt.
Een opgeladen, vergrendelde battery en normale vergrendelings- en trekkercommando's veroorzaken geen zaagbladbeweging.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-16: FM-16 ONMIDDELLIJK BATTERY, LADER, VLOEISTOF OF STRUCTUREEL GEVAAR
FM-16: FM-16 HET GEREEDSCHAP OF BATTERY HEEFT ROOK, VLOEISTOF, ZWELLING OF BRANDGEUR
FM-05: FM-05 TREKKER BLIJFT HANGEN OF SNELHEIDSREGELING IS ONVEILIG
FM-01: Geen LED of motor reactie Controleer lading, plaatsing, centrale vergrendelingspositie, contacten en trekker via FM-01
fm-p13-b-17e1d6d1: De vergrendelknop of trigger blijft hangen, beweegt niet volledig, start
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-01: Fm-01 Zaag reageert niet op zaagbladslag
FM-02: FM-02 BATTERY ZIT NIET GOED, VERGRENDELT OF KOMT NIET LOS
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-09: FM-09 DRAAIENDE GELEUGEL IS VERBOGEN, LOS OF DRAAIT NIET
FM-11: FM-11 ZAAGBLAD WAAIT, BUIGT OF BRENGT BREUK
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-14: FM-14 LOOSLOOPSLAG SCHAAFT, KLOP, BLOKKEERT OF TRILT
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG