수리 가이드 검색

지식 베이스에서 수리 가이드, 매뉴얼, 증상 및 오류 코드를 찾으세요.

매뉴얼

증상

Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
El paquete está hinchado, goteando, siseando, humeando, quemándose, aplastado, mojado o abierto.
Obecne są dym, płomień, łuk elektryczny, ciecz, uszkodzony przewód, uszkodzenie battery lub odsłonięta struktura.
A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
Tool or battery becomes abnormally hot, smells hot, or repeats heat shutdown after light use.
표준 1/4인치 파워 그루브 임팩트 비트가 육각 홀더에 삽입되지 않거나 잠기지 않으며 해제되지 않습니다.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
방향 선택기가 정상적으로 움직이고 걸림을 유지하지만 척이 한 방향으로만 작동하거나 선택한 화살표와 반대로 회전함.
The release button moves poorly or the pack remains trapped on the tool rails.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
충전기가 비정상적으로 뜨겁거나 젖었거나 탄 단자가 있음
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
척이 멈추고 battery가 제거된 상태에서 척을 손으로 돌려 기어를 정렬해도 상단 선택기를 1단 또는 2단 범위로 완전히 이동할 수 없음.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.

고장 모드