FM-14: FM-14 BATTERY가 공구 또는 충전기에서 걸려 분리되지 않음

battery가 완전히 또는 부분적으로 장착되었으나 정상 해제 조작 및 직선으로 당겨도 분리되지 않음.

• One or both release tabs or a mating catch are jammed, broken, or loaded sideways
• Debris, swelling, distortion, heat damage, or corrosion binds the insertion stem
• The pack was forced, twisted, or inserted with an adapter
• The tool or charger housing is damaged
• The interface is still energized or the tool is under mechanical load

1. The pack is removed by the normal release without damage, or the intact assembly is routed for controlled service separation.

1.

이것은 전체 수리 매뉴얼에 포함된 문제 해결 안내의 미리보기입니다.

• 안정된 작업 표면

• The pack is fully or partly engaged but cannot be removed by operating the normal release and pulling straight.

  The pack is fully or partly engaged but cannot be removed by operating the normal 1. Turn the tool off or unplug the charger, secure the assembly on a stable surface, and

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

공개 페이지에는 미리보기만 표시됩니다. 전체 수리 단계, 다이어그램 및 검증 절차를 다운로드하려면 전체 매뉴얼을 구매하세요.