failure mode
Fm-07 블레이드가 삽입되지 않거나 유지되지 않음
Fm-07 블레이드가 삽입되지 않거나 유지되지 않음
진단 개요
Fm-07 블레이드가 삽입되지 않거나 유지되지 않음
예상 근본 원인
- Blade shank is wrong, bent, or burred
- Clamp slot contains chips or pitch
- Blade is not inserted from the front
- Clamp jaws or slider are worn
- Blade is too short for the planned cut
빠른 점검
- The correct blade seats fully and passes a firm hand tug-check.
수리 미리보기
1.
이것은 전체 수리 매뉴얼에 포함된 문제 해결 안내의 미리보기입니다.
관련 증상
Blade will not stay clamped
Blade will not stay clamped Reject the wrong blade, seat it from the front, and use FM-07.
With the clamp lever working, a correct blade will not enter fully or fails the hand tug-check.
With the clamp lever working, a correct blade will not 1. Remove battery; open the lever; reject a wrong or damaged blade.
전체 매뉴얼에 포함
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
공개 페이지에는 미리보기만 표시됩니다. 전체 수리 단계, 다이어그램 및 검증 절차를 다운로드하려면 전체 매뉴얼을 구매하세요.