修理ガイドを検索

ナレッジベース全体で修理ガイド、マニュアル、症状、エラーコードを検索できます。

マニュアル

症状

The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
Gói được chèn đầy đủ nhưng một hoặc cả hai tab nhả bên không giữ được, hoặc gói có thể bị kéo ra mà không cần nhấn cả hai tab.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
După eliberarea declanșatorului, lama continuă să se miște vizibil mai mult decât normal.
The guide bar steers sideways in the cut or the kerf curves even though the workpiece is supported and the saw is held square.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Bilah meninggalkan garis, melentur berlebihan, melengkung, atau patah selama potongan yang terkendali.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The running saw jumps, vibrates against the work, snags, or kicks backward or sideways.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
NO WORKLIGHT OR MOTOR RESPONSE
Lama nu rămâne fixată

故障モード