BOSCH GSR12V-140FCB22 KIT BATTERY (BAT414) - MANUALE DI RIPARAZIONE E MANUTENZIONE Manuale di riparazione
Istruzioni complete di riparazione e manutenzione per il pacco Bosch BAT414 12V Max al litio battery, inclusi risoluzione problemi, sicurezza e guida alla sostituzione.
$39.99
Ultimo aggiornamento Aug 7, 2026, 6:10 AM
Manual information
Informazioni su questo manuale
Istruzioni complete di riparazione e manutenzione per il pacco Bosch BAT414 12V Max al litio battery, inclusi risoluzione problemi, sicurezza e guida alla sostituzione.
0% di riparazioni riuscite segnalate
$39.99
Il manuale completo include
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Anteprima indice
- Bosch Gsr12v-140fcb22 Kit Battery (bat414) - Manuale di Riparazione e Manutenzione
- Le Sei Cose Che Contano Di Più
- Cosa Ha Realmente Questo Modello
- Mappa degli Indicatori e Segnali
- Avviso di Revisione Modello
- Il Percorso di Carica e Potenza
- Sequenza Di Uso Normale
- Comportamento Normale Che Può Sembrar Un Guasto
- Cosa Questo Modello Non Ha
- FM-10 L'INVOLUCRO, IL GAMBO, LA LINGUETTA DI RILASCIO, IL TERMINALE, LA BARRIERA O IL CORPO DEL PACCO È
- Carico ordinario
- FM-11 IL BATTERY È STATO BAGNATO, SOMMERSO O ESPOSO A LIQUIDO CONDUTTIVO O
- Movimenti
- FM-08 IL BATTERY DIVENTA INSOLITAMENTE CALDO SENZA FUMO, SCINTILLE,
- FM-15
This preview shows only a portion of the complete repair manual. Purchase to access the full repair documentation, downloadable PDF and detailed repair procedures.
Cause probabili
- The pack is discharged, too hot or cold, or in a protection state
- Terminal faces are dirty, wet, damaged, or not aligned
- The insertion stem stops before the electrical seat even though the pack looks inserted
- The sealed cell, conductor, terminal, or protection path has failed
- The comparison tool, rather than the battery, has failed
- The application is binding, stalled, overloaded, or using a damaged bit or attachment
- The pack is near empty, overheated, overcooled, or in protection
- Dirty or resistive contacts heat or interrupt current
- The sealed cell, conductor, temperature, or protection path is weak
- The tool has abnormal drag or its own electronic fault
- The battery is not fully charged or is at an extreme temperature
- Contact resistance from dirt, wear, or damage limits current
- The bit, attachment, fastener, or work interface is binding, dull, damaged, or overloaded
- The sealed cells or internal links have lost power capability
- The tool motor or controller is weak
- The pack has aged or lost usable cell capacity
- The full indication came from a charger or contact problem
- Cold, heat, a heavy drill/driver task, or tool drag raised energy demand
- Dirty contacts created loss and heat
- The comparison task or tool condition was not equivalent
- The sealed cells have high self-discharge or an internal leakage path
- The pack was not actually full before storage
- Storage was hot, wet, conductive, or near metal
- The battery was left in a tool that drew standby current
- The comparison interval or starting state was not controlled
- The insertion stem, guide surfaces, or seating stops are worn, dirty, or distorted
- Battery contacts are recessed, contaminated, loose, or damaged
- The charger contact carrier or slot is damaged
- The release tabs or seating geometry do not hold the electrical interface
- An internal battery terminal link is movement-sensitive
- The tool or work is stalled, overloaded, or binding
- Charging or use occurred in a hot environment with poor ventilation
- Dirty or resistive contacts are generating heat
- The pack has an internal cell, conductor, or protection defect
- The charger or tool is driving an abnormal condition
- Internal cell short, thermal runaway, or conductor failure
- Severe impact, puncture, crushing, fire, or excessive heat exposure
- Liquid or conductive contamination caused a short
- Improper charger, adapter, direct terminal connection, or modification
- A damaged pack was charged or used
- Drop, impact, crushing, puncture, or tool/charger ejection
- Heat, age, internal gas generation, or cell swelling
- Forced insertion, prying, adapters, or release-tab abuse
- Conductive/corrosive contamination damaged contacts or barriers
- A prior repair or modification compromised the sealed housing
- Rain, hose, puddle, submersion, or wet storage
- Salt, pool, bleach, cleaner, or chemical exposure
- Liquid entered through the terminal area or housing seam
- The pack was placed in a wet charger or tool
- A user attempted washing or liquid cleaning
- One or both release tabs or a mating catch are jammed, broken, or loaded sideways
- Debris, swelling, distortion, heat damage, or corrosion binds the insertion stem
- The pack was forced, twisted, or inserted with an adapter
- The tool or charger housing is damaged
- The interface is still energized or the tool is under mechanical load
- Battery contacts are worn, recessed, contaminated, loose, or damaged
- The insertion stem or release tabs permit electrical movement even though retention feels secure
- The internal terminal link is movement-sensitive
- The tool contact carrier or wiring is damaged
- Hand pressure is masking an unsafe interface fault
- The outlet or charger has no power or is faulty
- The pack is outside the allowed charging temperature range
- Contacts or guides are dirty, wet, damaged, or not fully seated
- The charger is not designated for the battery platform
- The sealed cell, temperature, conductor, terminal, or protection path has failed
- Wrong battery platform, identity mismatch, or an adapter is being attempted
- Debris obstructs the insertion stem, guide surfaces, tool cavity, or charger socket
- The stem, guide rib, seating stop, housing, or mating cavity is distorted
- Contacts or insulating barriers are bent or displaced
- The tool or charger interface, rather than the battery, is damaged
- A side release tab is dirty, cracked, worn, broken, or not returning
- The mating catch in the tool is worn or damaged
- The insertion stem or guide geometry misaligns the retaining tabs
- The housing is distorted even though insertion is possible
- The pack was not pushed fully to the normal seated stop
Modello supportato
Modelli correlati
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Bosch
Visualizza dettagli
Sintomi comuni
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Modalità di guasto
Riepilogo
Un pacco BAT414 completamente inserito e esternamente integro non produce uscita utilizzabile in un utensile Bosch 12V Max compatibile.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
Il battery perde carica rapidamente durante la conservazione e disconnessione, diventando inutilizzabile dopo un breve intervallo di conservazione fresco e asciutto.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
La ricarica inizia o si ferma in modo intermittente quando il battery viene mosso o tenuto in certe posizioni a causa di un contatto instabile o di archi elettrici.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
Il battery si riscalda anormalmente e rapidamente durante la carica, lo stoccaggio o l'uso dell'utensile senza fumo, scintille, perdite o gonfiore.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
Pericolo attivo di battery con fumo, sibilo, emissione, scintille, fiamma, fusione o perdita che indica fuga termica o danno grave.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
Il battery è stato esposto ad acqua o liquidi conduttivi/corrosivi, causando danni o condizioni di pericolo.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
Il battery è completamente o parzialmente inserito ma non può essere rimosso azionando il rilascio normale e tirando dritto.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
L'utensile si avvia ma l'uscita del battery si interrompe bruscamente sotto carico ordinario, causando una perdita improvvisa di potenza.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Riepilogo
Il battery si inserisce completamente ma una o entrambe le linguette di rilascio laterali non lo trattengono, o il battery può essere estratto senza premere entrambe le linguette.
Full repair guide includes
- Root Cause Analysis
- Required Tools
- Replacement Parts
- Step-by-step Repair Procedure
- Safety Precautions
- Verification Checklist
Manuali correlati
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli
Visualizza dettagli