failure mode
FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
The accessory bit binds, causing the tool to stall, twist sharply, or stop unexpectedly in the work.
Panoramica diagnostica
The accessory bit binds, causing the tool to stall, twist sharply, or stop unexpectedly in the work.
Cause probabili
- Bit or fastener is damaged, dull, or wrong for the task
- Tool is off-axis or the work is not secured
- Pilot hole or clearance is inadequate
- Load exceeds the tool, battery, or accessory capability
Controlli rapidi
- The correct accessory drives straight without binding, stalling, or uncontrolled reaction.
Anteprima riparazione
1.
Questa è un'anteprima della guida alla risoluzione dei problemi inclusa nel manuale di riparazione completo.
Sintomi correlati
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The accessory catches or stops in the material and the 1. Release the trigger and control the tool until all motion stops.
Incluso nel manuale completo
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Le pagine pubbliche mostrano solo un'anteprima. Acquista il manuale completo per scaricare passaggi di riparazione, diagrammi e procedure di verifica completi.