BOSCH GSR12V-140FCB22 KIT BATTERY (BAT414) - MANUAL PERBAIKAN DAN PERAWATAN Manual Perbaikan

Instruksi perbaikan dan perawatan komprehensif untuk paket Bosch BAT414 12V Max lithium-ion battery, termasuk pemecahan masalah, keselamatan, dan panduan penggantian.

$39.99

Last updated Aug 7, 2026, 6:10 AM

About this manual

Instruksi perbaikan dan perawatan komprehensif untuk paket Bosch BAT414 12V Max lithium-ion battery, termasuk pemecahan masalah, keselamatan, dan panduan penggantian.

0% Reported Successful Repair

Price

$39.99

Full Manual Includes

root cause analysis
tools needed
step-by-step repair procedure
diagrams
exploded views
post-repair checks

Table of contents preview

Bosch Gsr12v-140fcb22 Kit Battery (bat414) - Manual Perbaikan dan Perawatan
Enam Hal yang Paling Penting
Apa yang Sebenarnya Dimiliki Model Ini
Peta Indikator dan Sinyal
Peringatan Revisi Model
Jalur Pengisian dan Daya
Urutan Penggunaan Normal
Perilaku Normal yang Bisa Terlihat Seperti Kesalahan
Apa yang Tidak Dimiliki Model Ini
FM-10 RUMAH, BATANG, TAB PELEPAS, TERMINAL, PENGHALANG, ATAU BADAN PAKET
Beban Biasa
FM-11 BATTERY BASAH, TERENDAM, ATAU TERPAPAR CAIRAN KONDUKTIF ATAU
Gerakan
FM-08 BATTERY MENJADI PANAS SECARA ABNORMAL TANPA ASAP, API,
FM-15

This preview shows only a portion of the complete repair manual. Purchase to access the full repair documentation, downloadable PDF and detailed repair procedures.

Likely Root Causes

The pack is discharged, too hot or cold, or in a protection state
Terminal faces are dirty, wet, damaged, or not aligned
The insertion stem stops before the electrical seat even though the pack looks inserted
The sealed cell, conductor, terminal, or protection path has failed
The comparison tool, rather than the battery, has failed
The application is binding, stalled, overloaded, or using a damaged bit or attachment
The pack is near empty, overheated, overcooled, or in protection
Dirty or resistive contacts heat or interrupt current
The sealed cell, conductor, temperature, or protection path is weak
The tool has abnormal drag or its own electronic fault
The battery is not fully charged or is at an extreme temperature
Contact resistance from dirt, wear, or damage limits current
The bit, attachment, fastener, or work interface is binding, dull, damaged, or overloaded
The sealed cells or internal links have lost power capability
The tool motor or controller is weak
The pack has aged or lost usable cell capacity
The full indication came from a charger or contact problem
Cold, heat, a heavy drill/driver task, or tool drag raised energy demand
Dirty contacts created loss and heat
The comparison task or tool condition was not equivalent
The sealed cells have high self-discharge or an internal leakage path
The pack was not actually full before storage
Storage was hot, wet, conductive, or near metal
The battery was left in a tool that drew standby current
The comparison interval or starting state was not controlled
The insertion stem, guide surfaces, or seating stops are worn, dirty, or distorted
Battery contacts are recessed, contaminated, loose, or damaged
The charger contact carrier or slot is damaged
The release tabs or seating geometry do not hold the electrical interface
An internal battery terminal link is movement-sensitive
The tool or work is stalled, overloaded, or binding
Charging or use occurred in a hot environment with poor ventilation
Dirty or resistive contacts are generating heat
The pack has an internal cell, conductor, or protection defect
The charger or tool is driving an abnormal condition
Internal cell short, thermal runaway, or conductor failure
Severe impact, puncture, crushing, fire, or excessive heat exposure
Liquid or conductive contamination caused a short
Improper charger, adapter, direct terminal connection, or modification
A damaged pack was charged or used
Drop, impact, crushing, puncture, or tool/charger ejection
Heat, age, internal gas generation, or cell swelling
Forced insertion, prying, adapters, or release-tab abuse
Conductive/corrosive contamination damaged contacts or barriers
A prior repair or modification compromised the sealed housing
Rain, hose, puddle, submersion, or wet storage
Salt, pool, bleach, cleaner, or chemical exposure
Liquid entered through the terminal area or housing seam
The pack was placed in a wet charger or tool
A user attempted washing or liquid cleaning
One or both release tabs or a mating catch are jammed, broken, or loaded sideways
Debris, swelling, distortion, heat damage, or corrosion binds the insertion stem
The pack was forced, twisted, or inserted with an adapter
The tool or charger housing is damaged
The interface is still energized or the tool is under mechanical load
Battery contacts are worn, recessed, contaminated, loose, or damaged
The insertion stem or release tabs permit electrical movement even though retention feels secure
The internal terminal link is movement-sensitive
The tool contact carrier or wiring is damaged
Hand pressure is masking an unsafe interface fault
The outlet or charger has no power or is faulty
The pack is outside the allowed charging temperature range
Contacts or guides are dirty, wet, damaged, or not fully seated
The charger is not designated for the battery platform
The sealed cell, temperature, conductor, terminal, or protection path has failed
Wrong battery platform, identity mismatch, or an adapter is being attempted
Debris obstructs the insertion stem, guide surfaces, tool cavity, or charger socket
The stem, guide rib, seating stop, housing, or mating cavity is distorted
Contacts or insulating barriers are bent or displaced
The tool or charger interface, rather than the battery, is damaged
A side release tab is dirty, cracked, worn, broken, or not returning
The mating catch in the tool is worn or damaged
The insertion stem or guide geometry misaligns the retaining tabs
The housing is distorted even though insertion is possible
The pack was not pushed fully to the normal seated stop

Supported model

View model troubleshooting page

Bosch

Dcs578

View details

Bosch

Dcs575

View details

Bosch

Dcw210

View details

Bosch

Dcb115

View details

Bosch

Cmcs500m1

View details

Bosch

Cmcf800c1

View details

Bosch

Cmcd700c1

View details

Bosch

Gsr18v 190b22

View details

Bosch

Gks18v 25 Gks18v 25n

View details

Bosch

Gdx18v 1800

View details

Bosch

Gba18v40

View details

Bosch

Lcs1020

View details

Paket yang terisi penuh menjadi tidak dapat digunakan setelah interval penyimpanan dingin dan kering yang singkat meskipun tidak dibiarkan dalam alat atau charger.

View details

Paket terendam, terkena cipratan di dalam, dibiarkan di hujan, atau terpapar air asin, pemutih, klorin, atau cairan konduktif/korosif lainnya.

View details

Pengisian mulai atau berhenti saat battery digerakkan atau dipegang

View details

Output alat terputus-putus saat battery yang terpasang dengan aman bergerak

View details

Paket menjadi sangat panas dengan cepat atau menyakitkan selama pengisian, penyimpanan, atau penggunaan alat biasa, tetapi tidak ada ventilasi aktif, api, kebocoran, atau pembengkakan yang terlihat.

View details

Paket silinder berhenti sebelum posisi terpasang normal atau memerlukan gaya abnormal pada alat Bosch 12V Max yang kompatibel atau charger yang disetujui.

View details

battery yang tampak aman tidak memasuki siklus pengisian normal atau tidak pernah mencapai indikasi penuh yang ditentukan charger setelah penyetelan yang benar.

View details

Paket BAT414 yang secara eksternal baik dan terpasang penuh tidak menghasilkan output yang dapat digunakan pada alat Bosch 12V Max yang kompatibel.

View details

Paket terpasang penuh tetapi satu atau kedua tab pelepas samping tidak menahannya, atau paket dapat ditarik keluar tanpa menekan kedua tab.

View details

Indikasi charger atau siklus pengisian berubah saat battery yang terpasang disentuh, digeser, diangkat, atau ditahan dalam satu posisi.

View details

Alat yang kompatibel mulai normal, lalu tiba-tiba kehilangan semua output battery selama tugas biasa sementara pemicu tetap ditekan.

View details

Paket terpasang penuh atau sebagian tetapi tidak bisa dilepas dengan mengoperasikan pelepas normal dan menarik lurus.

View details

Alat terus berjalan tetapi daya terus-menerus rendah, tidak merata, atau bergejolak alih-alih berhenti sepenuhnya.

View details

Paket yang terpasang penuh dan tertahan memberi daya pada alat hanya dalam posisi tertentu atau terputus saat alat atau battery digerakkan, tanpa henti beban berlebih normal.

View details

battery sedang mengeluarkan asap, mendesis, mengeluarkan gas, memercik, terbakar, meleleh, bocor, atau suhu meningkat dengan cepat.

View details

battery memberikan daya awal normal tetapi mencapai habis jauh lebih cepat daripada paket Bosch 12V Max 2.0 Ah yang sehat dalam tugas biasa yang sama.

View details

Paket yang stabil retak, hancur, tertusuk, terbakar, berubah bentuk, membengkak, berkarat, atau memiliki kontak, penghalang, batang penyisipan, atau tab pelepas yang rusak.

View details

FM-01: FM-01 KIT BATTERY TIDAK MEMBERI DAYA PADA ALAT BOSCH 12V MAX KOMPATIBEL YANG DIKETAHUI BAIK

Summary

Paket BAT414 battery yang terpasang penuh dan secara eksternal baik tidak menghasilkan output yang dapat digunakan pada alat Bosch 12V Max yang kompatibel.

Full repair guide includes

Root Cause Analysis
Required Tools
Replacement Parts
Step-by-step Repair Procedure
Safety Precautions
Verification Checklist

BOSCH GSR12V-140FCB22 KIT BATTERY (BAT414) - MANUAL PERBAIKAN DAN PERAWATAN Manual Perbaikan

Manual information

About this manual

Full Manual Includes

Table of contents preview

Likely Root Causes

Supported model

Related Models

Common Symptoms

Failure Modes

Related Manuals