FM-01: BOR/DRIVER TIDAK AKAN MULAI DENGAN BATTERY TERVERIFIKASI

Bor/driver tidak mulai meskipun battery V20 yang terverifikasi dan terisi penuh terpasang dan tombol arah sepenuhnya maju atau mundur. Tidak ada suara motor, aktivitas LED, atau gerakan chuck, dan alat tetap tidak responsif.

• Battery is discharged, temperature-protected, or internally failed
• Battery contacts are dirty or the pack is not fully seated on the rails
• Forward/reverse button is centered or not fully in a drive detent
• Trigger, contact block, wiring, brushes, motor, or switch has failed

1. lock, or perform live internal tests.

1. Push the direction button fully forward or reverse and make one controlled no-load trigger test with the chuck empty.
2. Cross-test the battery in a known-good V20 tool or approved charger, and replace only a pack that fails reciprocal testing.
3. If a proven battery still gives persistent zero response, remove it and route the sealed trigger, contact block, brush, motor, or wiring path to qualified service.
4. Center the direction button, remove the battery, and inspect the tool and pack for liquid, swelling, cracks, melting, or burning.
5. Dry-clean the accessible battery and tool contacts, then slide in a room-temperature fully charged V20 battery until the latch clicks.

This is a preview of the troubleshooting guidance included in the full repair manual.

• battery V20 yang baik terpasang penuh, tombol arah sepenuhnya maju atau mundur, dan alat tidak mengeluarkan suara motor, respons LED, atau gerakan chuck. Keadaan mati bertahan saat alat diam.

  battery V20 yang baik terpasang penuh, tombol arah sepenuhnya 1. Pusatkan tombol arah, lepaskan battery, dan periksa alat serta paket untuk

• BOR/DRIVER TIDAK AKAN MULAI DENGAN BATTERY TERVERIFIKASI

  FM-01 BOR/DRIVER TIDAK AKAN MULAI DENGAN BATTERY TERVERIFIKASI FM-09 BATTERY WAKTU PENGOPERASIAN JAUH LEBIH SINGKAT DARI

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.