symptom
Water escapes while filling, carrying, cleaning, or storing the robot.
Water escapes while filling, carrying, cleaning, or storing the robot. STEPS
Qué significa este síntoma
Water escapes while filling, carrying, cleaning, or storing the robot. STEPS
Modos de fallo relacionados
Incluido en el manual completo
- Análisis de causa raíz
- Herramientas necesarias
- Procedimiento de reparación paso a paso
- Diagramas
- Vistas explosionadas
- Comprobaciones posteriores a la reparación
Las páginas públicas muestran solo una vista previa. Compra el manual completo para descargar los pasos de reparación, diagramas y procedimientos de verificación completos.
Síntomas y códigos de error relacionados
Related models
Common symptoms
- Pressing CLEAN produces no light, tone, or movement.
- The charger light remains dark with the charger connected to a known live outlet.
- The charger indicates charging but does not reach solid green in the expected charging period.
- The robot runs normally but the charged battery lasts far less than a typical job.
- The robot powers down before the job is complete and gives no repeatable beep count.
- The pack will not click into the rear bay or springs loose during handling.
- The robot stops or will not proceed and reports one beep after the two-tone distress sound.
- The robot refuses to start and reports two beeps after the two-tone distress sound.
- The robot will not start, or stops after a pad falls off, and reports three beeps.