FM-23: LA PUNTA SE DESLIZA O SALE DEL MANDRIL

FM-23

• Bit was not inserted straight or enough jaw length was not engaged
• Chuck was not tightened firmly by hand
• Bit shank is oily, undersized, worn, or damaged
• Chuck jaws or internal scroll are worn despite normal movement

1. A sound bit remains centered and retained through a moderate test, or chuck wear is proven.

1. Tighten the single-sleeve chuck firmly by hand using the spindle lock, then pull-test the bit before power.
2. Make one moderate controlled work test; if a sound correctly tightened bit still slips, route the chuck for service or supported replacement.
3. Release the trigger, remove the battery, and remove or catch the loose bit before it can fall.
4. Clean the bit shank and chuck jaws dry, reject a bent or damaged bit, and insert a sound bit straight with all three jaws centered.

Esta es una vista previa de la guía de solución de problemas incluida en el manual de reparación completo.

• Broca

• Las mordazas del portabrocas se abren y cierran normalmente, pero una broca compatible recta gira o se sale durante un taladrado o atornillado moderado.

  Las mordazas del mandril se abren y cierran normalmente, pero una broca recta 1. Suelte el gatillo, retire el battery y retire o atrape la broca suelta antes de que pueda caer.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Las páginas públicas muestran solo una vista previa. Compra el manual completo para descargar los pasos de reparación, diagramas y procedimientos de verificación completos.