BOSCH GSR12V-140FCB22 KIT BATTERY (BAT414) - REPARATUR- UND WARTUNGSHANDBUCH Reparaturanleitung

Umfassende Reparatur- und Wartungsanleitungen für den Bosch BAT414 12V Max Lithium-Ionen-battery-Akku, einschließlich Fehlersuche, Sicherheit und Austauschhinweisen.

$39.99

Zuletzt aktualisiert am Aug 22, 2026, 10:05 AM

Über dieses Handbuch

Umfassende Reparatur- und Wartungsanleitungen für den Bosch BAT414 12V Max Lithium-Ionen-battery-Akku, einschließlich Fehlersuche, Sicherheit und Austauschhinweisen.

0% erfolgreiche Reparaturen gemeldet

Price

$39.99

Das vollständige Handbuch enthält

root cause analysis
tools needed
step-by-step repair procedure
diagrams
exploded views
post-repair checks

Inhaltsverzeichnis-Vorschau

Bosch Gsr12v-140fcb22 Kit Battery (bat414) - Reparatur- und Wartungshandbuch
Die sechs wichtigsten Dinge
Was dieses Modell tatsächlich hat
Anzeige- und Signalübersicht
Modell-Revision Warnung
Der Lade- und Strompfad
Normale Gebrauchsanweisung
Normales Verhalten, das wie ein Fehler aussehen kann
Was dieses Modell nicht hat
FM-10 DAS GEHÄUSE, DER STIFT, DIE ENTRIEGELUNGSLASCHE, DER ANSCHLUSS, DIE BARRIERE ODER DER PACK-KÖRPER IST
Gewöhnliche Last
FM-11 DAS BATTERY WAR NASS, GETAUCHT ODER FLÜSSIGKEITS- ODER
Bewegungen
FM-08 DAS BATTERY WIRD OHNE RAUCH, FUNKEN,
FM-15

This preview shows only a portion of the complete repair manual. Purchase to access the full repair documentation, downloadable PDF and detailed repair procedures.

Unterstütztes Modell

Fehlerbehebungsseite des Modells anzeigen

Bosch

Gsr18v 190b22

Details anzeigen

Bosch

Gks18v 25 Gks18v 25n

Details anzeigen

Bosch

Gdx18v 1800

Details anzeigen

Bosch

Gba18v40

Details anzeigen

[DE] A fully charged pack becomes unusable after a short cool, dry storage interval even 1. Fully charge the pack on a designated charger, remove it from both charger and tool,

Details anzeigen

[DE] The pack was immersed, splashed internally, left in rain, or exposed to salt water, bleach, 1. Stop immediately, do not insert the pack into a tool or charger, and remove it from

Details anzeigen

[DE] The charger indication or charge cycle changes when the seated battery is touched, Stop wiggling the battery, unplug the charger, and remove the pack so arcing or repeated contact interruption cannot continue. shifted, lifted, or held in one position. FM-07

Details anzeigen

[DE] A fully seated and retained pack powers the tool only in certain positions or interrupts Stop at the first movement-related interruption, remove the battery, and do not keep flexing, tapping, or pressing the pack to FM-15

Details anzeigen

[DE] The pack becomes rapidly or painfully hot during charging, storage, or ordinary tool Stop use or charging immediately, remove the battery only if it is safe to handle, and place the stable pack on a clear FM-08

Details anzeigen

[DE] The cylinder pack stops before the normal seated position or requires abnormal force in a 1. Confirm BAT414 is printed on the battery and the mating product is Bosch 10.8V/12V

Details anzeigen

[DE] A safe-looking battery does not enter a normal charge cycle or never reaches the exact 1. Inspect the battery for heat, swelling, cracks, leakage, liquid, scorching, impact damage,

Details anzeigen

[DE] An externally sound, fully inserted BAT414 pack produces no usable output in a 1. Remove the battery from the tool and inspect the housing, insertion stem, release tabs,

Details anzeigen

[DE] The pack inserts fully but one or both side release tabs do not retain it, or the pack can 1. Stop using an interface that cannot retain the battery and remove the pack so it cannot

Details anzeigen

[DE] The charger indication or charge cycle changes when the seated battery is touched, 1. Stop wiggling the battery, unplug the charger, and remove the pack so arcing or

Details anzeigen

[DE] A compatible tool starts normally, then loses all battery output suddenly during an 1. Release the tool trigger immediately, wait for all motion to stop, remove the battery, and

Details anzeigen

[DE] The pack is fully or partly engaged but cannot be removed by operating the normal 1. Turn the tool off or unplug the charger, secure the assembly on a stable surface, and

Details anzeigen

[DE] The tool continues to run but power is continuously low, uneven, or surging instead of 1. Stop the tool, remove the battery, and inspect the pack for heat, swelling, damage,

Details anzeigen

[DE] A fully seated and retained pack powers the tool only in certain positions or interrupts 1. Stop at the first movement-related interruption, remove the battery, and do not keep

Details anzeigen

[DE] The battery is actively smoking, hissing, venting gas, sparking, burning, melting, leaking, 1. Move away immediately, keep other people and pets away, and do not touch, carry,

Details anzeigen

[DE] The battery provides normal initial power but reaches depletion much sooner than a 1. Fully charge the suspect battery on a designated charger at normal room temperature

Details anzeigen

[DE] The stable pack is cracked, crushed, punctured, burned, deformed, swollen, corroded, or 1. Remove the battery from every tool and charger only if safe, keep metal away from the

Details anzeigen

FM-01: FM-01 DAS KIT BATTERY LIEFERN KEINE LEISTUNG FÜR EIN BEKANNT GUTES KOMPATIBLES BOSCH 12V MAX WERKZEUG

Zusammenfassung

Ein vollständig eingesetzter, äußerlich intakter BAT414 battery liefert keine nutzbare Ausgangsleistung in einem kompatiblen Bosch 12V Max Werkzeug.

Full repair guide includes

Root Cause Analysis
Required Tools
Replacement Parts
Step-by-step Repair Procedure
Safety Precautions
Verification Checklist

BOSCH GSR12V-140FCB22 KIT BATTERY (BAT414) - REPARATUR- UND WARTUNGSHANDBUCH Reparaturanleitung

Manual information

Über dieses Handbuch

Das vollständige Handbuch enthält

Inhaltsverzeichnis-Vorschau

Unterstütztes Modell

Zugehörige Modelle

Häufige Symptome

Fehlermodi

Zugehörige Handbücher