Søg i reparationsguider
Find reparationsguider, manualer, symptomer og fejlkoder i vidensbasen.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
Ingen LED eller motor respons
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
BATTERY ELLER OPLADER VIL IKKE STARTE ELLER FULDFØRE EN OPLADNING
BATTERY VIL IKKE SIDDE FAST, LÅSE, FRIGIVES ELLER FORBLIVE SIKKER
NO WORKLIGHT OR MOTOR RESPONSE
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
Boret sidder fast, motor går i stå, eller boremaskinen drejer skarpt i hænderne under arbejde.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
With a charged pack installed and direction selected, the trigger produces no light, sound, or anvil movement.
FM-11: FM-11: Charging starts, stays delayed, or never reaches full
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-06: FM-06 RETNINGSKONTROL VIL IKKE VÆLGE
FM-11: FM-11 HASTIGHED ELLER MOMENT ER LAV MED KORREKT OPSÆTNING