failure mode
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
Diagnostisk oversigt
FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
Sandsynlige grundårsager
- Gear or motor pinion connection has failed
- Impact hammer or anvil is broken or disconnected
- Internal bearing or drive part is jammed
- Severe wear has stripped the transmission path
Hurtige tjek
- Motor rotation is transmitted to a stable rotating anvil, or the tool is removed for service.
Reparationsforhåndsvisning
1.
Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.
Relaterede symptomer
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor can be heard, but the front output remains 1. Release the trigger, remove the battery, and remove the bit if it can be done
Inkluderet i den fulde manual
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.