Søg i reparationsguider
Find reparationsguider, manualer, symptomer og fejlkoder i vidensbasen.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
NO WORKLIGHT OR MOTOR RESPONSE
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
Ingen LED eller motor respons
BATTERY ELLER OPLADER VIL IKKE STARTE ELLER FULDFØRE EN OPLADNING
BATTERY VIL IKKE SIDDE FAST, LÅSE, FRIGIVES ELLER FORBLIVE SIKKER
With a charged pack installed and direction selected, the trigger produces no light, sound, or anvil movement.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-11: FM-11: Charging starts, stays delayed, or never reaches full
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-08: FM-08 BOREPATRON VIL IKKE ÅBNE, LUKKE ELLER MODTAGE EN BIT
FM-09: FM-09 BIT GLIDER ELLER VIL IKKE BLI' KLEMT FAST