Skoen er bøjet, revnet, løs eller vipper på en flad arbejdsflade

Bundpladen vil ikke ligge fladt, bøjer eller revner synligt, forskydes i forhold til savens krop eller vipper på en verificeret flad overflade.

• Drop, impact, or side loading bent the shoe
• Pivot, depth guide, or fastening point is loose or damaged
• Sawdust or debris is trapped under the shoe
• Bevel or depth hardware is not locked, imitating structural looseness

1. The repaired shoe sits flat without rocking, locks securely to the saw, and supports a square straight controlled scrap cut.

1. Remove the battery and place the clean shoe on a verified flat surface without the blade touching anything.
2. Clean the shoe and inspect the plate, edges, pivot, depth guide, bevel joint, and visible fasteners for bend, crack, gap, or movement.
3. Lock the depth and bevel levers and recheck rocking, flatness, and blade-to-shoe relationship with a straightedge and square.
4. - If the shoe remains bent, cracked, loose, or unstable, do not bend it back or cut - use authorized shoe and pivot replacement/alignment service.

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• FM-25: Fm Dcs578 25

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.