Udløserlåseknappen sidder fast eller blokerer ikke længere udløseren

Låsen kan ikke trykkes for at tillade udløseren, vender ikke tilbage, eller lader udløseren bevæge sig uden en bevidst låsehandling.

• Sawdust or impact damage is jamming the external button
• Lock-off spring, button, or housing guide is broken or displaced
• Trigger or switch housing is cracked or distorted
• Internal switch assembly has failed

1. With the battery removed, the trigger is positively blocked at rest and moves only while the lock-off is deliberately operated.

1. Remove the battery before testing the lock-off, and keep fingers away from the trigger until power is removed.
2. - Inspect the button and surrounding housing for cracks, binding, packed sawdust, or a button that does not return - clean externally with a dry brush or dry
3. With no battery installed, press and release the lock-off several times while confirming that the trigger is blocked at rest and moves only during delibera
4. - If the control remains stuck, broken, or unable to block the trigger, do not reinstall the battery - route the complete saw for authorized switch and housin

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• FM-07: Fm Dcs578 07

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.