Et lige snit driver sidelæns, eller snitindikatoren matcher ikke klingens bane

Med skoen flad og skråningen på nul, driver saven til venstre eller højre fra føringslinjen, eller snitindikatoren peger konsekvent mod en anden venstre-højre klingebane.

• Operator is forcing a correction or side-loading the saw
• Blade is dull, bent, wrong, or has uneven tooth set
• Kerf indicator is being read from the wrong blade side or is damaged
• Shoe, spindle, or guard alignment is bent or loose Straightedge or guide; square; sharp straight blade; supported marked scrap.

1. A supported zero-bevel cut tracks straight and the kerf indicator consistently predicts the blade path without side force.

1. Stop the cut, let the blade stop, remove the battery, and do not force the saw sideways inside the kerf.
2. Fit a verified straight sharp blade, set zero bevel and correct depth, secure both levers, and inspect the shoe and kerf indicator for bend or looseness.
3. Mark supported scrap, align the indicator with the left or inner side of the blade path as the manual specifies, and use a straightedge without side pressu
4. If repeated cuts still drift or the indicator cannot agree with the actual blade path, stop and route the shoe, indicator, spindle, and guard alignment for

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• FM-20: Fm Dcs578 20

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.