Saven laver slibende, skrabende, bankende eller kraftig vibration med en sund klinge

En verificeret lige, korrekt klemt klinge drejer, men saven producerer destruktiv mekanisk støj eller stærk vibration ved tomgang eller under et let snit.

• Lower or upper guard is contacting the blade
• Bearing, spindle, gear, or motor rotor is damaged
• Foreign debris is inside the guard or drive area
• Shoe, handle, housing, or gearcase is loose or cracked

1. The repaired saw hand-turns smoothly and runs at no load and through a light cut without grinding, scraping, knocking, abnormal play, or heavy vibration.

1. Release the trigger, wait for a complete stop, remove the battery, and do not keep running the saw to identify a destructive sound.
2. - Confirm the blade is sound, correct, centered, and clamped - clear dry external debris and check both guards, shoe, handles, and housing for visible contact
3. With the battery removed, hand-turn the blade and feel for scrape, roughness, play, knock, or a point of binding.
4. If a sound blade still produces internal roughness, noise, play, or heavy vibration, keep the saw out of service for authorized spindle, bearing, gearcase,

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• FM-17: Fm Dcs578 17

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.