症状
浏览已记录的症状，并从搜索结果跳转到匹配的维修指南。
The trigger binds, fails to spring off, or the motor remains powered after release.
0 份相关手册
查找指南 →
The charger will not begin or complete charging, or its green light does not behave normally.
0 份相关手册
查找指南 →
Battery repeatedly overheats or protection-stops during light use
0 份相关手册
查找指南 →
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
0 份相关手册
查找指南 →
CONDUCTIVE DEBRIS IS IN THE BATTERY CAVITY OR VENTS
0 份相关手册
查找指南 →
外观完好且完全插入的 BAT414 电池组在兼容 Bosch 12V Max 工具中无可用输出。
0 份相关手册
查找指南 →
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
0 份相关手册
查找指南 →
The cool saw starts, then stops during a brief no-load test or light cut before heat builds.
0 份相关手册
查找指南 →
The trigger returns and motor power ends, but the chuck repeatedly coasts much longer than normal.
0 份相关手册
查找指南 →
Battery becomes unusually hot during an otherwise normal charge
0 份相关手册
查找指南 →
A compatible tool starts normally, then loses all battery output suddenly during an ordinary task while the trigger remains commanded.
0 份相关手册
查找指南 →
GBA18V40 开始进入接收轨道，但在达到正常就位和锁定位置前卡滞。
0 份相关手册
查找指南 →
The battery reaches the normal seated position, but the release latch does not retain it and the pack can slide away without pressing the release button.
0 份相关手册
查找指南 →
The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
0 份相关手册
查找指南 →
The tool continues to run but power is continuously low, uneven, or surging instead of stopping completely.
0 份相关手册
查找指南 →
A battery that reached the seated position cannot slide back out when its release button is pressed. The pack is not actively smoking, swelling, leaking, or melting.
0 份相关手册
查找指南 →
battery 提供正常初始功率，但在相同普通任务中比同类健康的 2.0 Ah Bosch 12V Max 电池组更快耗尽。
0 份相关手册
查找指南 →
钻机无 MOTOR 或夹头响应
0 份相关手册
查找指南 →
锁定装置或触发器无法自由移动，不回位，响应间歇，或释放触发器后motor仍继续运行。
0 份相关手册
查找指南 →
The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
0 份相关手册
查找指南 →