搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

The charge-status button travels and returns normally, the pack has completed a normal charge in a known-good compatible charger, but no green segment lights when the button is pressed.
The saw starts normally but stops, pulses, or loses power during a cut, especially when pushed or when the battery is moved.
Serra desliga sob carga
一个完全插入、物理完好的兼容battery无红或黄灯，而同一DCB115能为其他已验证良好的兼容电池组充电。
Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
Laddaren startar inte eller slutför inte laddning, eller dess gröna lampa beter sig onormalt.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
TRIGGER STICKS, WILL NOT RETURN, OR MOTOR KEEPS RUNNING
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START

故障模式

part

干燥的 brush