搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

Bladet håller inte fastspänt
Med klämspaken fungerande går ett korrekt blad inte i helt eller klarar handdragstest.
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
battery保持物理卡扣，但motor、LED或两者在工具或battery移动至正常工作姿态时断电并恢复。
Tombol maju/mundur tidak masuk, kunci tengah gagal, atau alat berjalan ke arah yang salah.
The battery will not slide in, click into place, release, or remain secure in the handle.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
冲击级1/2英寸套筒无法完全安装、保持或从方形输出驱动拉出。
夹头套筒转动不足，无法移动爪或容纳正常直钻头。
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
With no accessory load, the front drive makes abnormal metallic noise or feels rough.
The accessory slips from the fastener, damages it, breaks it, or drives it beyond the intended seat.
Rotation and impact pulses are steady, but a normal fastener advances much more slowly than expected.
室温V20battery完全就位于带电批准充电器中，但未开始正常充电或电池包未显示充满指示。
已安装充电电池组，但触发器无工作灯、motor声音或冲击锤动作。

故障模式

part