搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
battery保持物理卡扣，但motor、LED或两者在工具或battery移动至正常工作姿态时断电并恢复。
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
已安装充电电池组，但触发器无工作灯、motor声音或冲击锤动作。
工具完全无反应 - 无LED或MOTOR
无 LED 或 motor 响应
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
可以听到motor运转声，但夹头静止或不正常旋转。
LED工作灯不亮或异常持续点亮
The motor can be heard, but the front output remains still in both directions with the bit removed.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
Charger green LED flashes
Charger green LED stays on
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
Smoke, liquid, swelling, or major damage
Bit jams or drill stalls
Round bit will not grip
Trigger speed changes
Unit shuts off abruptly
The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
FM-01: 无 LED 或 motor 响应 通过 FM-01 验证充电、电池安装、中心锁位置、触点和触发器
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-05: 如果锯子在确认有电且控制自由的情况下仍无反应，保持机壳关闭，
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-18: FM-18 油从盖子、油箱或机壳泄漏
FM-08: FM-08 链条松弛、下垂或无法保持张力
FM-04: FM-04 运行时间非常短或工具突然关闭
FM-15: FM-15 工具或 BATTERY 过热或冷却气流受阻
FM-13: FM-13 LED不亮或闪烁
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-03: FM-03 BATTERY 或充电器无法开始或完成充电
FM-10: FM-10 MOTOR 运行但夹头不转
FM-02: FM-02 BATTERY 无法安装、锁定、释放或保持固定
FM-19: 模式/扭力環無法轉動或對齊
FM-22: FM-22 BATTERY 或充电器过热、膨胀、开裂、泄漏或冒烟
FM-12: FM-12 链条移动但因安装反向而不切割
FM-15: FM-15 链条使用中跳脱或脱轨
FM-21: FM-21 导轨、锯链、护套或切割附件损坏
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK