搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
垫子转动时出现异常驱动接触噪音
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
Chuck clicks while tightening
battery无法完全滑入手柄、锁定、保持或正常释放。
The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
Smoke, flame, severe arcing, liquid, battery damage, melted contacts, exposed parts, or cracked structure.
BATTERY WILL NOT CHARGE
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
FM-19: Unormalt støy fra drivkontakt oppstår mens puten roterer
FM-15: Puten setter seg fast etter service på pute-assemblé
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-12: FM-12 附件凸轮卡住、卡滞或扭曲工具
FM-11: FM-11 速度或扭矩在正确设置下偏低
FM-14: FM-14 钻机空载时磨损或振动
FM-12: FM-12 钻头卡滞、卡死或扭转钻机
FM-11: FM-11 刹车无法快速停止输出
FM-27: FM-27 工具或电池组过热，或热关闭重复发生
FM-02: 电池组无法安装、锁定或释放
FM-04: FM-04 工具启动后冷却时断电
FM-04: FM-04 钻机冷却时断电
FM-16: FM-16 立即BATTERY、充电器或工具危险
FM-03: FM-03 BATTERY无法开始或完成充电