搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

症状

Chain moves but does not cut
Motosega morta con pacco carico
Motor runs, chain does not
The chain is hard to pull around the bar, the bar becomes unusually hot, or smoke appears without an electrical odor.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
The lithium battery or charger shows abnormal heat, swelling, cracking, electrolyte, hissing, odor, sparks, or smoke.
motor duyulabilir, ancak tetik tutulurken zincir hareketsiz kalır veya sadece titrer.
The guide bar steers sideways in the cut or the kerf curves even though the workpiece is supported and the saw is held square.
After chain or bar work, the cover will not sit flush, the bar will not align, or the locking knob cannot begin correctly.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
A tool-free knob is frozen, cross-threaded, spins without effect, will not clamp the bar, or cannot hold the set tension.
Liquid entered the tool, the housing emits smoke or sparks, plastic melts, a burning odor appears, or wiring or contacts are exposed.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
The chain hangs below the guide bar, can be pulled too far from the rail, or becomes loose again after adjustment.
battery无法完全滑入工具，无法卡入或保持锁定，释放异常。
链条绕导板移动但仅摩擦木材，几乎不产生木屑，无法进入切口。
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
锯子完全无反应 - 无工作灯且无 Motor 响应
The motor can be heard, but the front output remains still in both directions with the bit removed.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.

故障模式

part