搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
LED工作灯不亮或异常持续点亮
工具完全无反应 - 无LED或MOTOR
已安装充电电池组，但触发器无工作灯、motor声音或冲击锤动作。
Charger green LED flashes
Charger green LED stays on
无 LED 或 motor 响应
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Bit jams or drill stalls
Round bit will not grip
Smoke, liquid, swelling, or major damage
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.
Trigger speed changes
Unit shuts off abruptly
可以听到motor运转声，但夹头静止或不正常旋转。
Motosega morta con pacco carico
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
FM-08: FM-08 链条松弛、下垂或无法保持张力
FM-18: FM-18 油从盖子、油箱或机壳泄漏
FM-01: 无 LED 或 motor 响应 通过 FM-01 验证充电、电池安装、中心锁位置、触点和触发器
FM-13: FM-13 LED不亮或闪烁
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-05: 如果锯子在确认有电且控制自由的情况下仍无反应，保持机壳关闭，
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-03: FM-03 BATTERY 或充电器无法开始或完成充电
FM-02: FM-02 BATTERY 无法安装、锁定、释放或保持固定
FM-04: FM-04 运行时间非常短或工具突然关闭
FM-07: FM-07 扭矩环无法移动、保持或控制离合器打滑
FM-08: FM-08 无钥匙卡盘爪无法打开、关闭、释放或夹紧
FM-10: FM-10 MOTOR 运行但夹头不转
FM-15: FM-15 工具或 BATTERY 过热或冷却气流受阻
FM-02: 电池组无法安装、锁定或释放
FM-11: FM-11 MOTOR运行但链条不动
FM-12: FM-12 链条移动但因安装反向而不切割
FM-15: FM-15 链条使用中跳脱或脱轨
FM-21: FM-21 导轨、锯链、护套或切割附件损坏
FM-22: FM-22 BATTERY 或充电器过热、膨胀、开裂、泄漏或冒烟