搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

症状

The accessory catches or stops in the material and the tool reacts sharply in the hand.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The motor can be heard, but the front output remains still in both directions with the bit removed.
Battery 无法充电或充电器显示延迟或故障状态
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
NO WORKLIGHT OR MOTOR RESPONSE
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
空载锯片速度低、波动或断断续续，未接触木材前
The housing, handle, rails, nose, vents, lens, or accessory mount is cracked or loose.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.

故障模式

part