搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

症状

Battery becomes unusually hot during an otherwise normal charge
室温下，放置在经过验证的兼容通风充电器中的 battery 在正常静止充电过程中比已知良好的同类 battery 明显发热，但无冒烟、肿胀或熔化现象。
Battery loses charge rapidly while stored disconnected
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
BATTERY SEATS BUT WILL NOT STAY LATCHED
BATTERY WILL NOT SLIDE FULLY INTO A COMPATIBLE TOOL OR CHARGER
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
运行时间远短于匹配的已知良好 battery
The battery is cool and dry but the outer shell is cracked, split, punctured, missing a piece, or open at a seam, with no smoke, liquid, swelling, odor or dangerous heat.
A proven compatible charger gives its normal full-charge indication, yet the removed battery shows little or no charge and can run a known-good low-load tool only briefly or not at all.
After a normal full charge, the battery delivers usable power but substantially less work than a comparable known-good pack in the same tool, task and conditions.
The battery reaches the normal seated position, but the release latch does not retain it and the pack can slide away without pressing the release button.
With the battery removed from every tool and charger, the charge-status button cannot be pressed normally, remains depressed or has broken away.
A known-good compatible charger begins its normal charging cycle, but the cycle repeatedly stops, restarts, faults, or continues abnormally without reaching completion.
After a normal full charge, the battery loses a large amount of indicated charge or usable low-load runtime while stored by itself in a cool, dry place.
One or more green charge-status segments stay on, stay missing, or report an implausible level even though the battery charges and delivers normal low-load runtime.
GBA18V40 开始进入接收轨道，但在达到正常就位和锁定位置前卡滞。
A compatible charger continues to report its temperature-delay state after the battery has stabilized at room temperature and the charger works normally with another compatible battery.
The charge-status button travels and returns normally, the pack has completed a normal charge in a known-good compatible charger, but no green segment lights when the button is pressed.
The pack is fully seated, the release button is pressed, and the battery still cannot be slid out without excessive force.

故障模式

part