搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
电源断断续续或减弱，出现异常motor噪音，或brush火花过多。
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
无 LED 或 motor 响应
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The motor can be heard, but the front output remains still in both directions with the bit removed.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
battery无法完全滑入手柄、锁定、保持或正常释放。
Tool or battery becomes abnormally hot, smells hot, or repeats heat shutdown after light use.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
A seated battery shows no charge response, or charge never reaches a usable full state.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
Unit shuts off abruptly
Charger green LED stays on
FM-01: 无 LED 或 motor 响应 通过 FM-01 验证充电、电池安装、中心锁位置、触点和触发器
FM-27: FM-27 工具或电池组过热，或热关闭重复发生
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-11: FM-11 刹车无法快速停止输出
FM-04: FM-04 工具启动后冷却时断电
FM-15: FM-15 工具或BATTERY过热或反复关机
FM-05: FM-05 触发器卡滞或速度控制不安全
FM-04: FM-04 钻机冷却时断电
fm-p13-b-17e1d6d1: 锁止或触发卡滞，无法完全移动，启动
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-08: FM-08 夹头无法打开、关闭或接受钻头
FM-05: 如果锯子在确认有电且控制自由的情况下仍无反应，保持机壳关闭，
FM-04: FM-04 运行时间非常短或工具突然关闭
FM-08: FM-08 链条松弛、下垂或无法保持张力
FM-03: FM-03 BATTERY无法开始或完成充电
FM-13: FM-13 LED不亮或闪烁
FM-10: FM-10 紧固输出弱或无冲击动作
FM-05: FM-05 触发器卡滞，速度不稳定，或工具无法停止
FM-16: FM-16 立即BATTERY、充电器、液体或结构危险
FM-14: FM-14 空载行程磨擦、敲击、卡滞或振动