搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
无 LED 或 motor 响应
工具完全无反应 - 无LED或MOTOR
已安装充电电池组，但触发器无工作灯、motor声音或冲击锤动作。
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
可以听到motor运转声，但夹头静止或不正常旋转。
LED工作灯不亮或异常持续点亮
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The motor can be heard, but the front output remains still in both directions with the bit removed.
Charger green LED flashes
Charger green LED stays on
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
Unit shuts off abruptly
Bit jams or drill stalls
Smoke, liquid, swelling, or major damage
The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.
Round bit will not grip
Trigger speed changes
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
FM-01: 无 LED 或 motor 响应 通过 FM-01 验证充电、电池安装、中心锁位置、触点和触发器
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-05: 如果锯子在确认有电且控制自由的情况下仍无反应，保持机壳关闭，
FM-08: FM-08 链条松弛、下垂或无法保持张力
FM-18: FM-18 油从盖子、油箱或机壳泄漏
FM-10: FM-10 MOTOR 运行但夹头不转
FM-15: FM-15 工具或 BATTERY 过热或冷却气流受阻
FM-04: FM-04 运行时间非常短或工具突然关闭
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-13: FM-13 LED不亮或闪烁
FM-03: FM-03 BATTERY 或充电器无法开始或完成充电
FM-08: FM-08 无钥匙卡盘爪无法打开、关闭、释放或夹紧
FM-02: FM-02 BATTERY 无法安装、锁定、释放或保持固定
FM-07: FM-07 扭矩环无法移动、保持或控制离合器打滑
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE