搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
充电、锁定的battery和正常触发命令无旋转、无冲击或无LED。
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
已安装充电电池组，但触发器无工作灯、motor声音或冲击锤动作。
LED工作灯不亮或异常持续点亮
工具完全无反应 - 无LED或MOTOR
Charger green LED flashes
Charger green LED stays on
无 LED 或 motor 响应
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
Motosega morta con pacco carico
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
Smoke, liquid, swelling, or major damage
Bit jams or drill stalls
Round bit will not grip
Trigger speed changes
可以听到motor运转声，但夹头静止或不正常旋转。
Unit shuts off abruptly
FM-18: FM-18 油从盖子、油箱或机壳泄漏
FM-08: FM-08 链条松弛、下垂或无法保持张力
FM-01: 无 LED 或 motor 响应 通过 FM-01 验证充电、电池安装、中心锁位置、触点和触发器
FM-05: 如果锯子在确认有电且控制自由的情况下仍无反应，保持机壳关闭，
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-13: FM-13 LED不亮或闪烁
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-03: FM-03 BATTERY 或充电器无法开始或完成充电
FM-12: FM-12 链条移动但因安装反向而不切割
FM-15: FM-15 链条使用中跳脱或脱轨
FM-22: FM-22 BATTERY 或充电器过热、膨胀、开裂、泄漏或冒烟
FM-21: FM-21 导轨、锯链、护套或切割附件损坏
FM-19: 模式/扭力環無法轉動或對齊
FM-02: FM-02 BATTERY 无法安装、锁定、释放或保持固定
FM-15: FM-15 工具或 BATTERY 过热或冷却气流受阻
FM-04: FM-04 运行时间非常短或工具突然关闭
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION