FM-12: 锯片卡住、停转或锯子反冲

刀片夹紧、卡在切缝中、上升或跳动，或无法安全重新启动。

• Workpiece support lets the kerf close on the blade
• Blade is dull, damaged, dirty, or installed incorrectly
• Depth or bevel lever is loose or set incorrectly
• Saw is twisted, forced, or restarted in the kerf
• Fastener, knot, or offcut pinches the blade

1. The saw completes a supported cut without binding, stalling, or kickback.

1. Release the trigger and hold the saw still in the kerf.
2. Wait for a complete stop, remove the battery, then free and support the workpiece correctly.
3. Check blade condition, direction, depth, bevel locks, and the cut path for obstructions.
4. Restart only with the blade centered and teeth clear, then verify a controlled supported cut.

这是完整维修手册中所含故障排除指南的预览。

• 斜切杠杆和象限
• 切缝导向和导轨槽
• 深度杠杆和底座
• 深度、斜角或鞋组件
• 圆锯片

• 锯片卡住、停转或锯子反冲

  刀片夹紧、卡在切缝中、上升或跳动，或无法安全重新启动。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。