symptom
锯完成切割，但0度切割不方正，斜切角度与刻度不符，或锯缝偏离预定角度。
锯完成切割，但0度切割不方正， 1. 拆下battery，将斜角设为零，在底板和刀片本体之间放置方尺，避开硬质合金齿。
此症状的含义
锯完成切割，但0度切割不方正， 1. 拆下battery，将斜角设为零，在底板和刀片本体之间放置方尺，避开硬质合金齿。
相关故障模式
包含在完整手册中
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。
相关症状和错误代码
Related models
Common symptoms
- Motor 运行但锯片不转
- Saw cuts out under load
- Blade wobbles or grinds
- The blade turns, but the saw feeds poorly, stalls in the kerf, burns the wood, splinters excessively, or overloads during an ordinary cut.
- The saw suddenly lifts, jumps toward the operator, climbs out of the kerf, or walks backward as the blade pinches or twists.
- 插入battery时刀片启动，扳机卡住，或释放扳机无法断电。
- The saw starts normally but stops, pulses, or loses power during a cut, especially when pushed or when the battery is moved.
- 能听到motor运转声，但刀片静止、启动迟缓或打滑，未跟随motor转动。