症状
浏览已记录的症状，并从搜索结果跳转到匹配的维修指南。
插入battery時鋸片啟動，扳機卡住，或鬆開扳機無法斷電。
0 份相关手册
查找指南 →
室溫嘅V20 battery完全就位喺有電嘅認可充電器，但正常充電唔開始或電池包永遠唔顯示充滿。
0 份相关手册
查找指南 →
The drill will not start with a charged known-good battery
0 份相关手册
查找指南 →
A powered compatible charger shows no response to the seated pack.
0 份相关手册
查找指南 →
一個充滿電嘅電池組喺短時間冷卻乾燥儲存後變得無法使用，即使佢冇放喺工具或充電器入面。
0 份相关手册
查找指南 →
The clamp lever opens normally, but the installed blade remains trapped in the front clamp.
0 份相关手册
查找指南 →
With no lock-off button pressed, the trigger can move, or a lock-off button remains depressed instead of resetting.
0 份相关手册
查找指南 →
battery已插入但會拉出、抬起或失去固定，冇按釋放掣。可見嘅電池組同充電器結構睇落完整。
0 份相关手册
查找指南 →
BATTERY WILL NOT SLIDE FULLY INTO A COMPATIBLE TOOL OR CHARGER
0 份相关手册
查找指南 →
電鑽冇 MOTOR 或夾頭反應
0 份相关手册
查找指南 →
無緊固負載時，速度波動、有死區、斷斷續續或忽略扳機行程。
0 份相关手册
查找指南 →
The lock-off or trigger will not move freely, does not return, responds intermittently, or the motor continues after the trigger is released.
0 份相关手册
查找指南 →
Tool output is much lower with this pack than with a known-good pack.
0 份相关手册
查找指南 →
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
0 份相关手册
查找指南 →
The battery will not slide fully into the handle, stay retained, or release normally.
0 份相关手册
查找指南 →
After the trigger is released, the blade keeps stroking noticeably longer than normal.
0 份相关手册
查找指南 →
The pack inserts fully but one or both side release tabs do not retain it, or the pack can pull out without pressing both tabs.
0 份相关手册
查找指南 →
The guide bar steers sideways in the cut or the kerf curves even though the workpiece is supported and the saw is held square.
0 份相关手册
查找指南 →
The pack is fully seated, the release button is pressed, and the battery still cannot be slid out without excessive force.
0 份相关手册
查找指南 →
The foot rocks on a flat surface, is bent or cracked, or moves despite locked adjustments.
0 份相关手册
查找指南 →