症状
浏览已记录的症状，并从搜索结果跳转到匹配的维修指南。
The trigger binds, fails to spring off, or the motor remains powered after release.
0 份相关手册
查找指南 →
The charger will not begin or complete charging, or its green light does not behave normally.
0 份相关手册
查找指南 →
Battery repeatedly overheats or protection-stops during light use
0 份相关手册
查找指南 →
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
0 份相关手册
查找指南 →
CONDUCTIVE DEBRIS IS IN THE BATTERY CAVITY OR VENTS
0 份相关手册
查找指南 →
一個外觀正常、完全插入嘅 BAT414 電池組喺兼容 Bosch 12V Max 工具中冇產生可用輸出。
0 份相关手册
查找指南 →
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
0 份相关手册
查找指南 →
The cool saw starts, then stops during a brief no-load test or light cut before heat builds.
0 份相关手册
查找指南 →
The trigger returns and motor power ends, but the chuck repeatedly coasts much longer than normal.
0 份相关手册
查找指南 →
Battery becomes unusually hot during an otherwise normal charge
0 份相关手册
查找指南 →
A compatible tool starts normally, then loses all battery output suddenly during an ordinary task while the trigger remains commanded.
0 份相关手册
查找指南 →
GBA18V40 開始插入接收軌，但喺到達正常插好同扣緊位置之前卡住。
0 份相关手册
查找指南 →
The battery reaches the normal seated position, but the release latch does not retain it and the pack can slide away without pressing the release button.
0 份相关手册
查找指南 →
The battery stops before the fully seated position and the charger cannot begin a normal charge. No visible charger crack, conductive debris, or swollen pack has yet been confirmed.
0 份相关手册
查找指南 →
The tool continues to run but power is continuously low, uneven, or surging instead of stopping completely.
0 份相关手册
查找指南 →
A battery that reached the seated position cannot slide back out when its release button is pressed. The pack is not actively smoking, swelling, leaking, or melting.
0 份相关手册
查找指南 →
battery 提供正常初始電力，但喺同類健康嘅 2.0 Ah Bosch 12V Max 電池組中，喺相同普通任務中更快耗盡。
0 份相关手册
查找指南 →
電鑽冇 MOTOR 或夾頭反應
0 份相关手册
查找指南 →
The lock-off or trigger will not move freely, does not return, responds intermittently, or the motor continues after the trigger is released.
0 份相关手册
查找指南 →
The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
0 份相关手册
查找指南 →