搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
motor同軸轉動，但鋸片喺墊圈上停滯或滑動，喺正常支撐切割時。
已裝入充電電池包，但扳機無工作燈、motor聲音或鐵砧動作。
Pemicu menyalakan area kerja, tetapi motor tetap diam dan landasan tidak bergerak.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The motor can be heard, but the front output remains still in both directions with the bit removed.
工作燈亮起但Motor同鋸片唔啟動
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
鋸機或者齒輪箱異常熱或者有熱味但無煙霧或火花
360度塵口塞住或者鬆脫，或者兼容嘅喉管/接頭唔會保持連接。
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The quick-release collar binds, will not move fully forward, or stays forward after release.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
battery唔會完全滑入手柄、鎖定、保持或正常釋放。
Il serbatoio contiene olio ma la catena rimane asciutta, il primer non dà risultati visibili o il percorso dell'olio della barra rimane asciutto.
La motosega taglia lentamente, produce polvere fine invece di segatura, vibra nel taglio o deve essere spinta con forza nonostante la valutazione di affilatura.
Motosega morta con pacco carico
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-11: FM-11 刹车无法快速停止输出
FM-03: Fm-03 Battery 唔會充電
FM-09: FM-09 鑽頭滑動或唔會保持夾緊
FM-01: FM-01: No LED or motor response Prove charge, seating, center-lock position, contacts, and trigger through FM-01
FM-06: MOTOR運轉但鋸片不轉
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-27: FM-27 工具或電池包過熱，或者熱量熄火重複發生
FM-04: FM-04 UNEALTĂ PORNEȘTE, APOI SE OPREȘTE CÂND ESTE RECE
FM-10: FM-10 IEȘIREA DE FIXARE ESTE SLABĂ SAU LIPSEȘTE ACȚIUNEA DE IMPACT
FM-15: FM-15 TOOL OR BATTERY OVERHEATS OR SHUTDOWN REPEATS
FM-12: FM-12 鑽頭卡住、卡死或扭轉電鑽
FM-05: Se la sega resta spenta con alimentazione provata e comandi liberi, lasciare l'involucro
FM-04: FM-04 RUNTIME IS VERY SHORT OR THE TOOL SHUTS OFF ABRUPTLY
FM-05: FM-05 扳機卡住或速度控制唔安全
FM-32: 操作期間工具冒煙
FM-03: 鋸開動後，扳機保持按住時會斷電
FM-04: FM-04 鑽頭冷卻時斷電
FM-08: FM-08 夾頭唔能打開、關閉或接受鑽頭
FM-11: FM-11 正確設置下速度或扭力低
Motor o caja de engranajes
相容嘅 battery
brush seco
Cool known-good battery
Correct impact bit
Halbzoll-Schlag-Steckschlüssel
Impact socket
Mango, protección o carcasa estructural
Tapa de aceite con bulbo cebador
arbetsstycke
En godkänd battery laddare
En rak rundskaftad borrbits
Ett kompatibelt 12V MAX* battery paket
timer
battery cunoscută, încărcată, rece
起子頭或者起子頭座
模式或者扭力領圈
充電器同指示燈
可拆卸 20V MAX* battery
可變速扳機