搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

The direction button jams, will not hold center lock, or the tool runs in only one direction.
夾頭套唔會轉足夠令爪子移動或容納正常直鑽頭。
Blatt bleibt nicht geklemmt
Dengan tuas penjepit berfungsi, bilah yang benar tidak dapat masuk sepenuhnya atau gagal uji tarik tangan.
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
The battery stays physically latched, but the motor, LED, or both cut out and return when the tool or battery is moved through ordinary working orientation.
Tombol maju/mundur tidak masuk, kunci tengah gagal, atau alat berjalan ke arah yang salah.
La motosega taglia lentamente, produce polvere fine invece di segatura, vibra nel taglio o deve essere spinta con forza nonostante la valutazione di affilatura.
The battery will not slide in, click into place, release, or remain secure in the handle.
一個衝擊級1/2吋套筒唔會完全安裝、保持或從方形輸出驅動拉出。
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
NO WORKLIGHT OR MOTOR RESPONSE
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
With no accessory load, the front drive makes abnormal metallic noise or feels rough.
The accessory slips from the fastener, damages it, breaks it, or drives it beyond the intended seat.
Rotation and impact pulses are steady, but a normal fastener advances much more slowly than expected.

故障模式

part