symptom
一個衝擊級1/2吋套筒唔會完全安裝、保持或從方形輸出驅動拉出。
一個衝擊等級嘅 1/2 吋插座唔會完全安裝， 1. 拆除 battery，冷卻插座，支撐工具同插座。
此症状的含义
一個衝擊等級嘅 1/2 吋插座唔會完全安裝， 1. 拆除 battery，冷卻插座，支撐工具同插座。
相关故障模式
包含在完整手册中
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。
相关症状和错误代码
Related models
Common symptoms
- 充電、鎖定嘅 battery 同正常扳機指令冇旋轉、冇衝擊、冇 LED。
- battery唔會完全滑入手柄、鎖定、保持或正常釋放。
- 標準1/4吋動力槽衝擊批頭唔能插入、鎖定或從六角座釋放。
- 無負載正常，但批頭、套筒或緊固件卡住、滑脫或扭轉工具。
- A seated battery shows no charge response, or charge never reaches a usable full state.
- The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
- The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
- A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.